Features:

• Description: SCSI External Small Computer System Interface Cable HD50 Narrow-Bus 50-Pin Male D-Sub 25-Pin Male Unbranded Haurtian UL E164535 Low Voltage Computer Wire 28AWG 6FT SKU 155150
• Manufacturer: Not Specified
  • Not Specified
• Brand or Distributor:
  • Dell adapts a multi-sourcing strategy for their supply chain, contracts and splits orders among OEM vendors.
  • Unbranded
  • Haurtian Low Voltage Computer Wire
• Model: (and/or Compatible, Equivalent, Interchangeable)
  • Haurtian UL E164535
  • Haurtian CSA LL112842
• Connector:
  • NEMA 1-15P Male Plug (Volex UL E62405 ME301S)
  • IEC C7 2-Slot Figure 8 Non-Polarized Female Receptacle (Volex UL E62405 VAC7S)
  • D-Sub HD50 1.27mm Pitch 50-Pin Male
  • D-Sub DB25 2.77mm Pitch 25-Pin Male
• Pinout: (Wiring Circuits checked with an Ohm Meter, not a Spec, for reference only.)
  • Straight-Thru
    • DB9F 1 - DB9M 1
    • DB9F 2 - DB9M 2
    • DB9F 3 - DB9M 3
    • DB9F 4 - DB9M 4
    • DB9F 5 - DB9M 5
    • DB9F 6 - DB9M 6
    • DB9F 7 - DB9M 7
    • DB9F 8 - DB9M 8
    • DB9F 9 - DB9M 9
    • Shield - Shield
• Cable Marking
  • (UL) SJT 3/C 14AWG(2.08mm²) VW-1 105°C 300V E204978 CSA SJT 3/C 2.08mm²(14AWG) FT2 105°C 300V 204790 MSL
    • The Cable (300V): The text printed on the cord body represents the safety rating of the bulk raw wire alone. Under Underwriters Laboratories (UL) standards, Junior Hard Service cords (like SJT) are universally rated for a maximum of 300V. This means the internal PVC insulation and jacket thickness can safely withstand up to 300 volts without experiencing electrical breakdow.
    • The Connector (250V): The MSL-126 markings represent the certification of the molded plug end manufactured by MSL Enterprises Corp. Standard power plug configurations (such as IEC C19/C20 or specific NEMA locking lines) are physically keyed and mechanically spaced for maximum grid classifications—most commonly 250V or 125V in commercial/industrial sectors.
• Cable Marking (AC Power Cord):
  • (UL) E138949-E SPT-2 2/C 18AWG(0.824mm²) 60°C 300V VW-1 ---LINETEK--- CSA LL90989 SPT-2 2/C 18AWG(0.824mm²) 60°C 300V FT2 JET ---LINETEK--- VFF 300V 0.75mm² 2012 -F- "LF"
    • 'N.M.' (Non-Magnetic / Non-Migrating): This denotes that the raw insulation compound is free of heavy, magnetic metallics and is formulated as a "non-migrating" plastic. It guarantees that the chemical plasticizers bound inside the PVC rubber sheath will not sweat, bleed out, or chemically react with and corrode adjacent plastics over years of resting in tight structural spaces.
    • 'ABS' (Acrylonitrile Butadiene Styrene): This specifically highlights that the rigid, heavy-duty molded plug ends on either side of the flexible cord are reinforced with ABS structural resin. This industrial thermoplastic ensures the wall plug blades and device connectors are incredibly crush-resistant, impact-resistant, and electromagnetically stable.
    • 'NISPT-2' North American Service Parallel Thermoplastic, Type 2.
      • 'N' (Non-Integral / Double-Insulated): This is the most important feature. "Non-integral" means the cable is double-shielded. Inside, each copper wire is wrapped in its own separate layer of color-coded plastic insulation. Then, both of those insulated wires are wrapped together inside a final, outer protective PVC jacket.
      • 'I' (Indoor): The cord is engineered strictly for dry, indoor residential environments. It lacks the UV-resistant and moisture-blocking additives required for outdoor use.
      • 'S' (Service): Indicates a flexible power cord designed to safely deliver electricity to portable tools or household appliances.
      • 'P' (Parallel): The internal wires run perfectly parallel to each other side-by-side, giving the cable its flat, ribbon-like appearance rather than a round shape.
      • 'T' (Thermoplastic): The outer protective casing and inner insulation are made entirely of flexible polyvinyl chloride (PVC) thermoplastic.
      • '-2' (Insulation Thickness): An NISPT-1 cord has a very thin insulation layer (0.030 inches) and is restricted to ultra-low-power items like clocks. An NISPT-2 cord features a much thicker insulation layer (0.045 inches). This extra thickness provides significantly better protection against punctures, cuts, pinches, and structural heat buildup.
    • 'SPT-1 / SPT-2 / SPT-3' Service Parallel Thermoplastic, Type 1, 2, or 3
      • 'S' (Service): Indicates a flexible power cord designed to deliver electricity to portable household appliances or consumer electronics.
      • 'P' (Parallel): The internal copper wires run perfectly parallel to each other side-by-side, giving the cable its flat, ribbon-like appearance rather than a round, twisted shape
      • 'T' (Thermoplastic): The outer protective casing and insulation are made entirely of polyvinyl chloride (PVC) thermoplastic, which is highly flexible and durable
      • '-1' Features a very thin insulation layer (0.030 inches / 0.76 mm). It is strictly for ultra-low-power devices like small alarm clocks or Christmas tree string lights. It cracks and degrades quickly if stepped on or pinched
      • '-2' Features a much thicker insulation layer (0.045 inches / 1.14 mm). This extra thickness provides significantly better protection against punctures, cuts, pinches, and heat buildup. Because it is safer and tougher, it has largely replaced SPT-1 as the standard household appliance cord
      • '-3' Features the thickest insulation layer (0.060 inches / 1.52 mm) and is reserved for heavy-duty consumer appliances like refrigerators, room air conditioners, and large microwave ovens
    • 'SVT-2'
      • 'S' (Service Grade): Indicates a flexible service or portable power cord engineered to deliver electricity safely to consumer appliances and movable office gear.
      • 'V' (Vacuum Cleaner / Light-Duty): Dictates the structural class. Historically termed a "vacuum cleaner cord," this class uses a thinner, lighter PVC shielding layer than heavy-duty workshop cords (like SJT). It is optimized specifically for high flexibility in tight spaces.
      • 'T' (Thermoplastic): Indicates that the outer protective shell and inner insulation are both manufactured from rugged polyvinyl chloride (PVC) thermoplastic.
      • '-2' manufacturers use -2 or 2/C to specify that the cord has exactly 2 internal copper wires (conductors) twisted together.
    • '300V' (300 Volts): It represents the maximum voltage rating (or dielectric strength) that the cable's plastic insulation can safely handle without breaking down, melting, or sparking
    • 'VW-1' (Vertical Wire-1): It is a prestigious fire safety rating issued by Underwriters Laboratories (UL). This rating proves that the plastic insulation on the cord is highly flame-retardant and will not easily spread a fire if the device shorts out or catches fire.
    • 'FT2' (Flame Test 2): It is an official fire safety rating issued by the Canadian Standards Association (CSA). This stamp indicates that the cable has undergone and passed the standardized Canadian safety test for flame-retardant plastics on flexible cords
    • The reason there are both 0.75mm² (~18.46AWG) & 18AWG (0.824mm²) marking on the same cable:
      • This cable is a "world cord" certified for two different geographic regions that use entirely different sizing standard.
        • North America (UL & CSA) uses the American Wire Gauge (AWG) system. It certiies the conductor as 18 AWG (which equals 0.824mm²).
        • Japan (JET / PSE) uses the Metric system for wire cross-section areas. It certifies the exact same wire under Japan's standard size of 0.75mm².
        • Because 18AWG(0.824mm²) is slightly thicker than 0.75mm², it safely exceeds the physical and electrical safety requirement set by Japan's JET.
      • This allows Linetek to manufacture a single cost-effective cable that can be legally packaged and sold with electronics in the US, Canada, and Japan.
• Shape & Insulation:
  • NISPT Flat Smooth-Sided Ribbon Double-Insulated
  • SJT Service Junior Thermoplastic Insulated Rated for up to 300V
  • SPT Flat Zip-Cord Single layer Insulation
  • SVT Round Double Jacketed (Outer + Inner)
• Wire Gauge: 18 AWG
• Item Length:
  • Overall : 19.5-inch
  • Wire: 18.5-inch
• Weight: 8.6 oz (Estimated Shipping Weight: 13oz)
• Condition: (Subject to Availability)
  • SKU ______A - Aged Open Box, unused excess inventory, may have  signs of cosmetic wear.
  • SKU ______N - New
  • SKU ______B - Bulk New, seller repackaged.
  • SKU ______E - Excess Inventory, not been used, may have signs of age.
  • SKU ______P - For Parts, Condition Vary, Not Eligible for Return or Refund.
  • SKU ______O - Open Box Unused, may have signs of cosmetic wear.
  • SKU ______R - Refurbished to working condition.
  • SKU ______U - Used, (Condition Vary), (may have or with) signs of cosmetic wear.
• Packaging: Non-Retail Packaging, in Unprinted Box or Plastic Bag.
• For use with or pulled from: (for reference only)
  • For use with:
  • Foxconn PVA080F12H -P03 -AE EP Part Number Breakdown:
    • 'DA' Product Series Advanced DC Axial Fan family
    • 'SA' Frame/Motor Type High-efficiency stator/housing design
    • '08' Frame Width 80mm outer dimensions
    • '20' Frame Thickness 20mm thin-profile casing
    • 'R' Voltage Standard 12V DC operating profile
    • '2' Speed Grade High-velocity performance ranking
    • 'U' Speed Sub-Tier Ultra-high output rating (draws 0.60A max)
    • 'P002' OEM Customer/Rev Code Identifies the specific wiring trim, wire length, and the 5-pin Dell proprietary plug connector
    • Photos are representative of the model and specifications you will receive; however, the exact factory batch codes, manufacturing dates, and plant location stamps may differ across individual units.
    • Photos are representative of the model and specifications you will receive; however, Dell frequently assigns multiple different Part Numbers (PNs) to the exact same physical part known as "substitutes" or "cross-references", the exact Dell PNs may differ across individual units.
    • Photos are representative of the model and specifications you will receive; however, HP frequently assigns multiple different Part Numbers (PNs) and Spare Part Numbers (SPS) to the exact same physical part referred to as "Functional Equivalents," "Substitutes," or "Cross-References.
    • Photos are representative of the model and specifications you will receive; however, it is normal and very common for Sunon to use slightly different custom Part Identifiers, even if the wire length and connectors appear identical to the naked eye.
  • Pulled from Dell Optiplex 7010 Mini Tower Computer
  • Serial Number Available or Sold:
    • CN-0725Y7-73308-1BF-09EB-A01 Used
    • CN-0725Y7-73308-37I-03XL-A01 Used
    • CN-0725Y7-73308-49P-008T-A01 Used
  • Cable Marking & Serial Number (Available or Sold):
    • BaoHing Electric Wire & Cable Mfr Co Ltd. (Shenzhen)
      (UL) SPT-2 E159216 VW-1 300V 60°C 3X18AWG GREEN CONDUCTOR FOR GROUNDING ONLY BAOHING CSA SPT-2 LL112007 VW-1 300V 60°C 3x0.824mm²(18AWG) LF
      • SN 0083694 CN-05120P-50587-064-0HZX-A05 New
    • Honglin Electronic Co., Ltd. (Weihai)
      E250127 (UL) SPT-2 3x18AWG(0.824mm²) 60°C 300V VW-1 ------  c(UL) SPT-2 3x0.824mm²(18AWG) 60°C 300V FT2 HONGLIN
      • SN 0083698 CN-05120P-76581-25M-2P0K-A05 New
      • SN 0083699 CN-05120P-76581-48K-00K9-A05 New
      • SN 0083700 CN-05120P-H5C00-891-07PJ-A06 New
    • Wonderful Hi-Tech Co., Ltd.
      (UL) SPT-2 18AWG(0.824mm²)X3C VW-1 60°C 300V E77975 GREEN CONDUCTOR FOR GROUNDING ONLY WONDERFUL-D CSA SPT-2 18AWG(0.824mm²)X3C FT2 60°C 300V LL43774 -F- -LF-
      • SN 0083693 CN-05120P-50587-05V-04QB-A05 New
    • Zhongli Science & Technology Group Co., Ltd.
      E239360 (UL) SPT-2 3/C 18AWG(0.824mm²) 60°C 300V VW-1 252445 CSA SPT-2 3/C 18AWG(0.824mm²) 60°C 300V FT2 ZHONGLI SCI-TECH GROUP GREEN CONDUCTOR FOR GROUNDING ONLY
      • SN 0083695 CN-05120P-77381-39R-000C-A05 New
      • SN 0083696 CN-05120P-77381-39R-06EY-A05 New
      • SN 0083697 CN-05120P-77381-47V-04LE-A05 New
  • Serial Number(s) Available or Sold:
    • SN